Mashinostroiteley str., 8, Aleksin +7 (48753) 2-41-35
Marketing Department (toll-free call) 8 (800) 500-56-50
Write to us at mail: aleksin-ask@mail.ru
Opening hours mon-fr:
from 8:00 to 16:30, dinner 12:00 to 12:30
Saturday, Sunday - closed
Home page » Products » Metal corrugated structures » Circular-section mcs, corrugation 130×32,5 mm, 130x31 мм

Circular-section mcs, corrugation 130×32,5 mm

Inquire the prices

To apply

Circular-Section MCS, corrugation 130х32.5 mm
Type Number of Steps Arch Length, mm Radius, mm Du, mm Area, sq. m
КТ 12 2400 382 764 0,46
КТ 13 2600 414 828 0,54
КТ 14 2800 446 892 0,62
КТ 15 3000 477 954 0,71
КТ 16 3200 509 1018 0,81
КТ 17 3400 541 1082 0,92
КТ 18 3600 573 1146 1,03
КТ 19 3800 605 1210 1,15
КТ 20 4000 637 1274 1,27
КТ 21 4200 668 1336 1,40
КТ 22 4400 700 1400 1,54
КТ 23 4600 732 1464 1,68
КТ 24 4800 764 1528 1,83
КТ 25 5000 796 1592 1,99
КТ 26 5200 828 1656 2,15
КТ 27 5400 859 1718 2,32
КТ 28 5600 891 1782 2,49
КТ 29 5800 923 1846 2,68
КТ 30 6000 955 1910 2,87
КТ 31 6200 987 1974 3,06
КТ 32 6400 1019 2038 3,26
КТ 33 6600 1050 2100 3,46
КТ 34 6800 1082 2164 3,68
КТ 35 7000 1114 2228 3,90
КТ 36 7200 1146 2292 4,13
КТ 37 7400 1178 2356 4,36
КТ 38 7600 1210 2420 4,60
КТ 39 7800 1241 2482 4,84
КТ 40 8000 1273 2546 5,09
КТ 41 8200 1305 2610 5,35
КТ 42 8400 1337 2674 5,62
КТ 43 8600 1369 2738 5,89
КТ 44 8800 1401 2802 6,17
КТ 45 9000 1432 2864 6,44
КТ 46 9200 1464 2928 6,73
КТ 47 9400 1496 2992 7,03
КТ 48 9600 1528 3056 7,33
КТ 49 9800 1560 3120 7,65
КТ 50 10000 1592 3184 7,96
КТ 51 10200 1623 3246 8,28
КТ 52 10400 1655 3310 8,60
КТ 53 10600 1687 3374 8,94
КТ 54 10800 1719 3438 9,28
КТ 55 11000 1751 3502 9,63
КТ 56 11200 1783 3566 9,99

 

CIRCULAR-SECTION MCS, CORRUGATION 130×32,5 MM

The closed circle contour gained the most wide spread under terms of usage as water-flow constructions. The advantage of such cross-section pipes (MCS) is that the computational models of the whole contour units under different load and influence types can be defined most precisely, and mounting and assembling methods as well as ground sleeve installation are quite easy and provide equal distribution of loads at pipe metal. The round MCS are the most cost-effective as for the cross-section area. They have the most structural strength as for loads and therefore they fit the high embankments most of all.

This section describes circular MCS with corrugation height 32.5 mm and step 130 mm, passage diameter Du 0.8 meters × 3.5 meters. MCS metal thickness is 2.5…4 mm depending on embankment height.

MCS are used in accordance with project documentation for construction of water free-flow ducts and municipal and industrial communication water drainage, transport tunnels and subways under railway and truck roads, small bridges and crosswalks for animals.

It is possible to manufacture MCS with other cross-sections (elliptical, ovoidal, etc.) depending on the requirements of project documentation.

CALL BOOKING

To know prices call us by telephone 8 (800) 500-56-50 or leave an offer and we call you back!

Copyright 2019. Алексинстройконструкция

Share:

Создание и продвижение сайта